Brown Design 400ml

✨ Brown Design 400ml is one of our most requested colours, and for good reason: consistent batch-to-batch matching means the bottle you buy today sprays exactly like the one your build needs next time.

Brown Design is formulated for interior and cockpit detailing, where finishes are typically flatter and less saturated than exterior bodywork to avoid glare and to match the real fabrics, plastics and leathers used inside a vehicle's cabin.

Brown Design is an aerosol spray paint that is supplied ready-to-use in a pressurised can, formulated for even coverage across larger surfaces. It suits 1:8, 1:10 and 1:12 R/C bodies and larger static models, as well as full-size hobby and DIY respray work where a fine airbrush cartridge would run out too quickly.

💡 Laboratory Application Tips

• Preparation (Primer): A Black or Grey Primer works best under this dark tone, reinforcing depth and helping the colour reach full density in fewer coats.
• Painting Technique: Shake the can thoroughly for at least a minute, then spray in light, even passes from roughly 20-30cm, keeping the can moving to avoid pooling. Several thin coats give better coverage and a smoother finish than one heavy pass.
• Finishing: Allow full curing time between coats and before clearcoating; aerosol lacquers can stay workable for longer than airbrushed paint, so patience at this stage avoids solvent wrinkling later.

⚠️ Chromatic Fidelity Notes

Real Scale vs. Miniature: This formula is adjusted to counter the "scale effect," so light reflection on the miniature stays proportional to the real vehicle or object rather than looking artificially pale or dark.

Visual note: Product photos are for reference only. The full three-dimensional depth and true pigment brilliance only become visible once the model is painted and properly clearcoated.

👉 Popular colours like this move quickly. Secure your bottle of Brown Design 400ml now and get back to the bench with confidence.