Welcome to Fire Scale Modeler The more you buy, the greater the discount on shipping costs, allowing you to save significantly on your purchases.
Klarna 30 extra days to pay or pay later in 3 interest-free installments
With generous discounts on shipping costs, you get more value for every Euro spent on your purchases.
The more you buy, the greater the discount on shipping costs, allowing you to save significantly on your purchases.

Instructions 1K Airbrush Varnish

Instructions for use:
Leave the base coat color for 15/30 minutes before applying the clear coat and apply a layer of mist (tack). After 5/10 minutes, you will be able to apply more coats (we recommend a minimum of 2 single coats for 5-10 minutes) between each)

  • Drying times in air at 20°C,
  • Pre-dry: 30-40 minutes
  • Touch drying: 1 hour
  • Total hardness: 24 hours,
  • Completely dry: 48 hours. Can be polished after 48 hours at 20°C
  • Air pressure: 1.5 bar
  • Low protection varnish and recommended to apply before decals, for total protection we recommend our 2K varnish.

Shelf life: at least 1 year if stored in original, tightly closed containers at low temperatures.

Decals: Whenever applying light mist layers over decals, NEVER go ahead with wet layers as this can melt the decal

This varnish may react with certain decals, we recommend that you test it on a piece separately..

Polishing: This varnish

It is not recommended to use these paints in cold or humid environments, always check the conditions of the space where you will be painting.

To thin if necessary use the Thinners Fire Scale Modeler. DO NOT use White Spirit, Acrylic Thinners or Cellulose Thinner, they are not suitable for this paint.

Tools can be cleaned with acetone, never use cellulose thinner or alcohol.

Work in a well-ventilated area and always wear a mask and keep away from children. Tighten cap for safety after each use.


Health and Safety Notes:

Harmful by inhalation, irritating to eyes. Keep away from sources of ignition. NO SMOKING .

Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and consult a doctor. Wear suitable gloves. Use in a well-ventilated area. Keep out of the reach of children.

In case of intoxication contact 112

For exclusive use and sale to pattern makers (18 years old)