Hyper Red Aston Martin – Koloi Aqua Spray 400ml

Hyper Red Aston Martin – Koloi Aqua Spray 400ml

Hyper Red Aston Martin from the Koloi Aqua Colors range, now in a ready-to-use 400ml aerosol can. No airbrush, no thinning and no cleaning: shake, spray and build up even coverage quickly on larger surfaces such as 1:8, 1:10 and 1:12 bodies, R/C shells, bases and big static models.

💡 Application tips

• Preparation: Grey or Black Primer recommended – a deep tone covers faster and more evenly over a darker, neutral base.
• Technique: shake the can for at least one minute, then spray light, even passes from about 20–30 cm, keeping the can moving. Several thin coats beat one heavy coat.
• Finishing: let each coat cure fully before masking or clear-coating.

🚚 Shipping: aerosol cans are dangerous goods for transport (UN1950). This product ships by road only, to Portugal and continental EU countries. It cannot be sent by air or to islands/overseas destinations.

⚠️ Safety: Pressurised container: may burst if heated. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not pierce or burn, even after use. Protect from sunlight and do not expose to temperatures above 50 °C. Use only outdoors or in a well-ventilated area. Keep out of reach of children. Read the label and Safety Data Sheet before use.

Product photos are for reference only; the final shade depends on primer, number of coats and clear coat.