🛠️ We are upgrading our store to serve you better! Some products may be temporarily moving categories. Use our Search bar for quick results.
Note: We are currently reorganizing our 3,000+ product catalog to make your shopping experience easier. If you can't find a specific color, please use the search bar or contact our support.
🛠️ "Store Update in progress. Note: Shipping to the USA is temporarily suspended. We apologize for the inconvenience.
⚠️ Important: Shipping to the USA is temporarily suspended. For other regions, we are currently upgrading our catalog to serve you better.
|

Martini Team Colors Set

Bottle
Quantity

Description

Fire Scale Color paint was designed to have an extra-fine pigment, matte finish and quick drying which guarantees a perfect paint job even for the least experienced.

Instructions :

Fire Scale Colors paints are pre-diluted for direct use in the airbrush.

Shake the bottle until the ink is well mixed. USE ONLY WITH AIRCRAFT Apply over white or gray primer.

It is recommended to paint at 1bar to 1.5bar and 3 to 4 thin layers crossed and an environment between 20 °C and 22 °C, the drying time is 5 to 10 min minimum, 20 to 30 min being recommended.

It is not recommended to use these paints in cold or humid environments, always check the conditions of the space where you will be painting.

To dilute if necessary use Fire Scale Modeler thinners. DO NOT use White Spirt, Acrylic Thinners or Cellulose Thinner, they are not suitable for this paint.

Tools can be cleaned with acetone, never use cellulose thinner or alcohol.

Work in a well-ventilated area and always wear a mask and keep away from children. Tighten cap for safety after each use.

DO NOT USE CLOSE HEAT, SPARKS OR FLAMES DURING THE PAINTING PROCESS

Health and Safety Notes:

Harmful by inhalation, irritating to eyes. Keep away from sources of ignition. NO SMOKING .

Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and consult a doctor. Wear suitable gloves. Use in a well-ventilated area. Keep out of the reach of children.

In case of intoxication contact 112

For exclusive use and sale to pattern makers (18 years old)

All trademarks or names that may appear on the firescalemodeler.pt website belong to their respective brand owners. Fire Scale Modeler does not claim any endorsement, connection or association or affiliation with the trademark owners.
When a trademark or .eg Martini brand is referred to, it is used to describe or identify the vehicles in which the color is or was used. It is in no way an assertion that such products are endorsed ​​or connected to, associated with, linked to or affiliated with Martini.

Information

Specifications:
- Ultra-fine pigmentation (does not obscure panel lines or surface details). - Resistant to masking and sanding. - Ready to use (pre-thinned for airbrushing). - 30ml Standard Size - Optimized for 1/24 - 60ml Value Pack - Great for 1/12 or 1/8 - 120ml Giant Scale (1/12, 1/8) Optimized
Instructions:
Shake vigorously before use. Recommended for airbrush application (0.2mm to 0.4mm needles). Ideal pressure: 15-25 PSI. Apply in thin, cross-coats. Touch dry in 10 minutes. Full cure in 24 hours.
Safety:
Flammable. Use in a well-ventilated area. Wear a protective mask (organic vapors) and gloves. Keep away from children.

Your Wishlist

You might also be interested in one of these

Send us a WhatsApp message