Bianco Onda Marina Ferrari + Base

Bianco Onda Marina: pearl white with a hint of ocean

Bianco Onda Marina, 'sea wave white', is a tailor-made Ferrari pearl white with a delicate blue pearl effect, giving it a cool, oceanic shimmer where a plain white would stay flat. Personalisation programmes allow owners to specify colours like this, so cars finished in it are rare and very individual. On a model, this two-layer system shows its character best under strong light: straight on it reads as clean white, while curves and edges pick up a soft blue sparkle that suits yachting-inspired and summer-themed builds.

The problem with pearls

Pearl effects show every mistake: wet passes cluster the pearl into blotches, and uneven coats change the colour from panel to panel. Controlled, even, slightly drier passes give a smooth, consistent shimmer.

How to apply

1. Shake the bottle for at least 60 seconds.
2. Prime with a white primer and let it dry fully.
3. Apply the supplied base colour first in even coats and let it dry before the colour coat.
4. Airbrush straight from the bottle, no thinning needed. Use a 0.2–0.4 mm nozzle at around 20 PSI (1.4 bar) and apply light, cross-hatched coats, letting each one flash off before the next.
5. Keep the airbrush moving at a constant distance for an even effect.
6. Let the paint cure overnight before masking or clear-coating.
7. Seal with a water-based clear coat: gloss for a factory shine, or satin or matte for work vehicles and interiors.
8. Clean the airbrush with water before the paint dries.

Why modelers choose Koloi Aqua

• Ready to spray: no guessing thinning ratios, the same result from every bottle
• Cleans up with water, so there are no strong solvent fumes at the bench
• Fine pigment grind for 1:8 to 1:72 scales, so panel lines and detail stay crisp
• One system: primer, colour and clear designed to work together

Shelf life

Estimated shelf life of more than 12 months when stored tightly closed between +10 °C and +28 °C, away from frost and direct sunlight. Shake well before use; if the paint has thickened or separated and does not remix, do not use it.

💡 Need a colour we don’t list? Our colour lab matches RAL, RLM and OEM paint codes on request.

The on-screen image is indicative: the final tone depends on the primer, the number of coats and the clear coat. Metallic, pearl and multi-layer effects cannot be fully represented on screen. Keep out of reach of children. Safety Data Sheet available on request.

Vehicle, manufacturer, team and sponsor names are used only to identify the colour reference. Fire Scale Modeler is not affiliated with or endorsed by the trademark owners.