Kevlar Gold

Kevlar Gold: the golden yellow of aramid composites

Aramid Gold reproduces the distinctive golden-yellow tone of aramid fibre, the tough composite material used in race car bodywork, motorcycle fairings, helmets, protective panels and aerospace parts since the 1970s. On a model, it is the colour to use under a weave decal or carbon-style overlay, or on its own to suggest raw aramid panels, fuel-cell covers and underbody protection. It is a solid, non-metallic shade, so it gives a realistic matt-to-satin composite look once topped with your preferred clear, and it adds instant technical authenticity to race cars and bikes.

The problem with bright colours

Reds, oranges and yellows are naturally translucent. Over a grey primer they go patchy or dull, and by the fifth coat the panel lines are gone. This colour is ground for strong coverage, so you reach full colour in fewer, thinner coats and the detail stays crisp.

How to apply

1. Shake the bottle for at least 60 seconds.
2. Prime with a white primer and let it dry fully.
3. Airbrush straight from the bottle, no thinning needed. Use a 0.2–0.4 mm nozzle at around 20 PSI (1.4 bar) and apply light, cross-hatched coats, letting each one flash off before the next.
4. Let the paint cure overnight before masking or clear-coating.
5. Seal with a water-based clear coat: gloss for a factory shine, or satin or matte for work vehicles and interiors.
6. Clean the airbrush with water before the paint dries.

Why modelers choose Koloi Aqua

• Ready to spray: no guessing thinning ratios, the same result from every bottle
• Cleans up with water, so there are no strong solvent fumes at the bench
• Fine pigment grind for 1:8 to 1:72 scales, so panel lines and detail stay crisp
• One system: primer, colour and clear designed to work together

Shelf life

Estimated shelf life of more than 12 months when stored tightly closed between +10 °C and +28 °C, away from frost and direct sunlight. Shake well before use; if the paint has thickened or separated and does not remix, do not use it.

💡 Need a colour we don’t list? Our colour lab matches RAL, RLM and OEM paint codes on request.

The on-screen image is indicative: the final tone depends on the primer, the number of coats and the clear coat. Keep out of reach of children. Safety Data Sheet available on request.

Vehicle, manufacturer, team and sponsor names are used only to identify the colour reference. Fire Scale Modeler is not affiliated with or endorsed by the trademark owners.