RAL 8019 Grey Brown

RAL 8019 Grey Brown: a dark brown with a grey cast

Grey Brown is a very dark brown with a strong grey cast, sitting somewhere between brown and anthracite. It is widely used on window frames, doors, facades and roofing. For modelers it is a practical colour for architecture in dioramas, dark wood and furniture, rubber and worn tyre tones, and grime and oil stains. Its neutral character makes it a flexible shading tone for many subjects.

Getting the tone right

Earthy browns and beiges can look muddy when sprayed thick. Light, even coats keep the tone clean and let panel lines and detail stay sharp.

How to apply

1. Shake the bottle for at least 60 seconds.
2. Prime with a grey primer and let it dry fully.
3. Airbrush straight from the bottle, no thinning needed. Use a 0.2–0.4 mm nozzle at around 20 PSI (1.4 bar) and apply light, cross-hatched coats, letting each one flash off before the next.
4. Let the paint cure overnight before masking or clear-coating.
5. Seal with a water-based clear coat: gloss for a factory shine, or satin or matte for work vehicles and interiors.
6. Clean the airbrush with water before the paint dries.

Why modelers choose Koloi Aqua

• Ready to spray: no guessing thinning ratios, the same result from every bottle
• Cleans up with water, so there are no strong solvent fumes at the bench
• Fine pigment grind for 1:8 to 1:72 scales, so panel lines and detail stay crisp
• One system: primer, colour and clear designed to work together

Shelf life

Estimated shelf life of more than 12 months when stored tightly closed between +10 °C and +28 °C, away from frost and direct sunlight. Shake well before use; if the paint has thickened or separated and does not remix, do not use it.

💡 Need a colour we don’t list? Our colour lab matches RAL, RLM and OEM paint codes on request.

The on-screen image is indicative: the final tone depends on the primer, the number of coats and the clear coat. Keep out of reach of children. Safety Data Sheet available on request.