WR1 F1 – Beige Gold

WR1 F1 – Beige Gold: a pearly gold for dark racing liveries

Beige Gold is a pearlescent tone based on RAL 1035 Perlbeige, where the pearl effect pushes the beige towards soft gold. Gold striping and lettering on dark blue was a classic combination of 1970s Formula 1, most famously on the Wolf WR1 that Jody Scheckter drove to victory on its debut in Argentina in 1977. Sprayed over a dark base or used for pinstripes and trim masked on a model, this shade gives that period gold accent with a subtle shimmer instead of a flat yellow.

The problem with pearls

Pearl effects show every mistake: wet passes cluster the pearl into blotches, and uneven coats change the colour from panel to panel. Controlled, even, slightly drier passes give a smooth, consistent shimmer.

How to apply

1. Shake the bottle for at least 60 seconds.
2. Prime with a grey primer and let it dry fully.
3. Airbrush straight from the bottle, no thinning needed. Use a 0.2–0.4 mm nozzle at around 20 PSI (1.4 bar) and apply light, cross-hatched coats, letting each one flash off before the next.
4. Keep the airbrush moving at a constant distance for an even effect.
5. Let the paint cure overnight before masking or clear-coating.
6. Seal with a water-based clear coat: gloss for a factory shine, or satin or matte for work vehicles and interiors.
7. Clean the airbrush with water before the paint dries.

Why modelers choose Koloi Aqua

• Ready to spray: no guessing thinning ratios, the same result from every bottle
• Cleans up with water, so there are no strong solvent fumes at the bench
• Fine pigment grind for 1:8 to 1:72 scales, so panel lines and detail stay crisp
• One system: primer, colour and clear designed to work together

Shelf life

Estimated shelf life of more than 12 months when stored tightly closed between +10 °C and +28 °C, away from frost and direct sunlight. Shake well before use; if the paint has thickened or separated and does not remix, do not use it.

💡 Need a colour we don’t list? Our colour lab matches RAL, RLM and OEM paint codes on request.

The on-screen image is indicative: the final tone depends on the primer, the number of coats and the clear coat. Metallic, pearl and multi-layer effects cannot be fully represented on screen. Keep out of reach of children. Safety Data Sheet available on request.

Vehicle, manufacturer, team and sponsor names are used only to identify the colour reference. Fire Scale Modeler is not affiliated with or endorsed by the trademark owners.